2010 Dodge Pickup
Mileage
169,568
Service Date
12/19/2024
Services Performed
- CAUSE: CORRECTION: CONFIRMED CUSTOMER CONCERN. FOUND CODE FOR P0344
- Camshaft Position Sensor Intermittent – Bank 1 Sensor 1. CHECKED OVER WIRING AND SENSOR AND FOUND THAT THE MOUNTING BOLT FOR THE CAM SENSOR TO BE LOOSE. REINSTALLED BOLT PROPERLY SO SENSOR WAS HELD IN PLACE. TESTED OPERATION AND FOUND SENSOR TO BE READING ERRATIC. INSTALLED OEM SENSOR AND TESTED. FOUND SIGNAL GOOD NOW. TEST DROVE AND FOUND CODE TO RETURN. FOUND ISSUE TO OCCUR WHEN CAMSHAFT IS ATTEMPTING TO PHASE. NEED TO REMOVE SENSOR AND EXAMINE TONE RING ON CAMSHAFT PHASER. EXAMINED THE PHASER AND NOTICED NO PHYSICAL DAMAGE. FOUND WHEN RUNNING AT 2000 RPM THE PHASER IS SHAKING AND RATTLING. NEED TO REPLACE CAM PHASER.
- CAMSHAFT GEAR OR SPROCKET – Remove & Replace – 5.7L Eng,4WD Variable Camshaft Timing,Phaser
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
TODD J. gave our service a 5 star review on 1/4/2025